数字海图的成果质量评测系统研究     

牛红光  杨波  陈长林  陈超  鲁强 《海洋测绘》2012,(3):23-25

总结归纳了海图要素数据存在的主要质量问题,阐述了评测采用的方法和依据,建立了基于质量评测算子库的海图数据要素检测引擎,初步检测出了海图数据成果质量是否存在问题,存在哪些问题,存在问题的性质、数量、位置,通过对成果的总体质量进行分析评价,最终给出了海图数据成果质量分析检测报告。  相似文献   

海陆空间信息一体化集成技术研究          下载免费PDF全文

陆毅  牛红光  夏启兵  李军  陈长林  朱颖 《海洋测绘》2012,(4):50-53

将国际标准与国内电子海图技术实践相结合,通过对各类数据源集成研究,建立了多元空间数据通用调显引擎,实现了CDC海图数据、地形图数据、S-57标准数据、遥感影像数据、DNC数据、MapInfo数据等陆海空统一的数字图源调用与显示,为融合各类数据源提供了一个基础技术平台。  相似文献   

0基于规则驱动的数字海图质量检测方法研究          下载免费PDF全文

黄毅  兰莉莎 《海洋测绘》2012,(4):67-70

将规则和规则库的原理和方法应用到了数字海图质量检测中,首先对数字海图质量规则的表示方法进行了介绍,在此基础上,对基于规则驱动的数字海图质量检测模型、流程和规则的定制进行了介绍,最后设计和构建了海图质量规则库的数据结构,分别对空间关系规则、属性约束规则描述表进行了定义和分析。  相似文献   

基于模糊聚类分析的莱州湾南岸地下水化学分布特征研究     

毕延凤  于洪军  徐兴永  苏乔 《海洋通报》2012,31(4):361-368

针对莱州湾南岸咸水入侵区地下水质连续、渐变和边界模糊的特征,利用规格化变换对莱州湾南岸地下水化学组分数据进行标准化,采用夹角余弦法作为相似系数,用平方法计算传递闭包构造模糊等价矩阵进行模糊聚类分析,将莱州湾南岸地下水划分为3类并绘制其平面分区图.在此基础上,用探索性数据分析技术的箱线图分别识别各类地下水各组分的分位数、中位数、极值等数据分布情况,并结合 Radial 图绘制各类地下水各组分均值;利用基于 CA 舒卡列夫分类方法的 Piper三线图识别了各类地下水的水化学类型;最后在相关分析基础上选取代表性指标绘制等值线图,结合模糊聚类分区探讨了分区各指标的空间结构特征及内在机理.综合上述分析,定义玉区为海水入侵重点治理区,域区为海水入侵综合防范与整治区,芋区为卤水区.  相似文献   

喀什—乌恰地区流动地磁测量数据处理及初步分析   总被引：1，自引：0，他引：1  

杨福喜  陈斌  杨欣  郑黎明  孙海军  帕尔哈提·再努拉 《内陆地震》2010,24(4):352-358

介绍了2008年在喀什—乌恰地区32个测点的流动地磁测量数据的处理方法。利用该数据建立了喀什—乌恰地区地磁场的曲面样条模型,绘制了区域地磁基本场分布图。以2005年中国地磁场球冠谐模型为参考场剥离了岩石圈磁场,绘制了喀什—乌恰地区岩石圈磁场局部异常分布图。表明岩石圈磁场局部异常与测区内地震在空间上有一定的对应关系。  相似文献   

基于星座图改进的QAM盲均衡算法     

张艳萍  薛全琪 《南京气象学院学报》2012,4(5):447-451

针对多模辅助算法均方误差高的缺点,提出了两种基于星座图改进的盲均衡算法.首先利用16QAM星座图信息,增加多模辅助算法代价函数中信号点的均衡数目,得到改进的多模辅助算法,与多模辅助算法相比,改进后的算法稳态均方误差更低,而且收敛速度略有提高;其次将改进的多模辅助算法和判决引导算法相结合,根据均方误差调整两种算法的比例,得到的混合算法进一步降低了稳态均方误差.水声信道仿真结果表明:提出的两种算法都可以有效地降低均方误差,适用于对精度要求较高的场合.  相似文献   

公共电话交换网时间认证系统的研制     

和康元  吴贵臣  冯平 《时间频率学报》2008,31(1)

研制了一种通过公共电话交换网进行时间认证的系统设备,利用电话网为数字时间戳服务机构提供标准时间服务.经实测,时间同步精度可以在±0.3 ms范围内,能满足数字时间戳服务机构为银行、证券、股票和期货交易等电子商务以及电子政务活动提供时间认证服务方面的要求.  相似文献   

The challenges of the landing obligation in EU fisheries     

《Marine Policy》2017

A feasibility study was conducted on the impacts of the new Common Fisheries Policy (CFP) rules requiring catches in regulated fisheries to be landed and counted against quotas of each Member State - the landing obligation (LO), and that catch of species subject to the LO below a minimum conservation reference size (MCRS) be restricted to purposes other than direct human consumption. The aim was to estimate the level of discarded fish likely to be covered by the new rules, the impact of the rules on EU fisheries and the regulatory challenges and responses to them. Data from EU's Scientific, Technical and Economic Committee on Fisheries (STECF) database were analysed to estimate the volume of unwanted catches produced by EU fisheries. Views were sought from policy officials and fisheries scientists through a questionnaire on the implications of the LO and the control of fisheries across Member States, and the potential adjustments that might be needed. Findings show that 11% (44,000 t) of the total catches of EU countries from which data were available are of fish under MCRS. The species with the highest volume of undersized discards associated with the lowest quota, which would potentially restrict the fishing opportunities for other quota species (i.e. choke species), are plaice and haddock with 18,000 and 14,000 t of undersized fish respectively, followed by whiting and cod with 5000 and 6000 t of undersized fish respectively. Discards data shows that the Netherlands, United Kingdom, France and Belgium will be most affected by landings for non-human markets. Findings also show that existing infrastructure at landing ports in all Member States is limited because there are currently limited facilities in place to handle animal by-products produced by the catching sector. Policy officials maintained that while they could support the fishing industry through funding programmes, it is the responsibility of fishers to ensure they have the right infrastructure to handle unwanted catches. The expectation is that the LO combined with the restriction to non-human consumption purposes will encourage fishers to internalise the costs of catching unwanted fish and motivate them to avoid unwanted catch. This will be realised if sufficient flexibility is given to fishers to find their own solutions to reducing unwanted catches. It is concluded that gear technology measures exist to enable the regulated fisheries to increase gear selectivity.  相似文献   

Deltaic soil behavior classification using CPTu records—Proposed approach and applied to fifty-four case histories     

A. Eslami  M. Alimirzaei  E. Aflaki  H. Molaabasi 《Marine Georesources & Geotechnology》2017,35(1):62-79

For the past four decades, the CPT has played a key role in onshore and offshore soil investigations. One of the main applications of cone penetration test (CPT) is the soil behavioral classification. Most of the developed methods for soil identification using CPT and CPTu (piezocone) data are well categorized for common soils, such as clays, silts, and sands. Soils with low resistance or more compressibility generally involve problems in geotechnical engineering practice and construction projects. Consequently, these unusual deposits require further evaluation and more detailed data. Five major groups of problematic soils including: liquefiable, sensitive, peaty, collapsible, and expansive soils have been considered in this study. One hundred and forty CPT and CPTu test records were collected from fifteen countries. Sixty-one of the records are related to difficult soils. A brief comparison is performed for currently used soil behavioral classification charts, such as by Campanella et al. (1985 Campanella, R. G., P. K. Robertson, D. Gillespie, and J. Greig. 1985. Recent developments in in-situ testing of soils. Proceedings of 11th International Conference on Soil Mechanics and Foundation Engineering, ICSMFE, San Francisco, Vol. 2, 849–54. [Google Scholar]), Robertson (1990 Robertson, P. K. 1990. Soil classification using the cone penetration test. Canadian Geotechnical Journal 27 (1):151–58. doi:10.1139/t90–014[Crossref], [Web of Science ®] , [Google Scholar]), Jefferies and Davies (1991 Jefferies, M. G., and M. P. Davies. 1991. Soil classification using the cone penetration test: Discussion. Canadian Geotechnical Journal 28 (1):173–76. doi:10.1139/t91–023[Crossref], [Web of Science ®] , [Google Scholar]) and Eslami and Fellenius (1997 Eslami, A., and B. H. Fellenius. 1997. Pile capacity by direct CPT and CPTu methods applied to 102 case histories. Canadian Geotechnical Journal 34 (6):886–904. doi:10.1139/cgj-34–6-886[Crossref], [Web of Science ®] , [Google Scholar]). Analysis based on CPT data indicates that a few commonly used charts recognize relatively well problematic deposits. However, further studies are needed to increase the accuracy and capability of methods. Existing charts have some problems due to the limitations of the nature of rectangular charts based on two axes. A new format of classification chart, i.e., triangular form containing cone tip resistance (q_c), sleeve friction (f_s), and pore pressure (u₂) is proposed for soil identification which can be realized in practice. The proposed chart with more accuracy and less scattering of data than the previous charts is able to identify soil types particularly for deltaic soils.  相似文献   

城市电子地图多尺度自动缩编方法     

尹向军  王芙蓉  印洁  诸敏秋  王树魁 《测绘通报》2017,(11):80

随着智慧城市、地理信息公共服务及地理国情数据等政务信息逐步公开,作为各类政务信息发布基础的城市电子地图在多尺度展现时,只能通过关闭、选取要素来实现,这种未进行制图综合的做法导致要素在逐级放大过程中,会出现跳跃性丢失和细节破碎的现象,既不符合地图表达要求也难以满足用户视觉体验。本文提出了一源数据多尺度自动缩编的技术方法,构建了最优化的"统一源头、一致派生、无级表达"技术体系,实现了城市电子地图联动更新和多尺度展现,节省了大量人力和物力,为最大限度地发挥测绘地理信息集成与服务能力提供保障。  相似文献